Thank You! Thank you for making BLUET! a part of your family. From the very beginning, BLUET! has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional Eco-friendly experience for our homes and our world. That's why BLUETS makes its presence in 70+ countries and is trusted by millions of customers across the globe.
Contents Before You Begin Safety Instructions General Safety Maintenance Handling & Storage What's In The Box Standard Packaging Product Overview Diagram Specifications Operation Powering On/Off LCD Screen Charging Discharging Capacity Expansion UPS BLUETS App Power Lifting Mode Appendix FAQs (Frequently Asked Questions} Technical Support WwW
Before You Begin The information contained herein is subject to change without notice. For the latest version of this user manual, please visit + The user manual contains instructions and notes on the operation and use of this unit. + BLUETS recommends that you use genuine accessories from BLUETS. « BLUETS shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the BLUETS.
Safety Instructions General Safety BLUETS products are developed to be safe and reliable. Please read this guide for important safety information about your device, The guide is intended to help you be more comfortable and productive while using this device. Failure to follow these guidelines for proper set up, use, and care for your device may cause damage to this unit and injury to yourself or others, I SAVE THESE INSTRUCTIONS! 1 « Always operate or store the unit within the specified temperature range.
Maintenance « When not using the unit for extended periods of time, power off the unit and disconnect the AC charging cable from the outlet. « Charge the unit to 50-70% SOC every 6 months for long-term storage. « Clean the unit with a dry cloth gently and carefully. Handling and Storage « Use mechanical assistance as needed. trolleys and adjustable height workbenches). * DO NOT stack anything on top of the unit either in storage or in use.
What's In The Box Standard Packaging Portable Power Station AC Charging Cable DC Input Cable Car Charging Cable User Manual * Below accessories are not included in standard packaging and can be purchased separately at bits few blusterous sul AP LARVA Cable Lead-acid Battery Charging Cable Down Module Cigarette Lighter-F to 32A Aviation Plug DC5521 Cable (24) supererogation OF
Product Overview Diagram @OOE®® 24V Cigarette Lighter Port 12V/30A RV Port . LCD Screen . USB-C PD3.0 . 18W USB-A Port . USB-A Port . 16A AC Output 8. 32A AC Output 9. Wireless Charging Pad 10. Power Button T. Battery Expansion Port 12. AC Input 13. DCI/DC2 Input 14.
Operation Powering On/Off Startup and shutdown: Press and hold the power button on AWACS or B300S to turn the combo on or off. AC/DC Output: Tap the ‘AC ON/OFF’ or 'DC ON/OFF" to enable or disable. Powering On ON ON Shutdown OFF OFF Mote: Turn on the DC power to enable wireless charging, When connected to the grid or PV, the combo turns on automatically.
Settings This section provides general setting configurations, including language, AC/DC output and input, ECO mods machine type, system date/time, ete. Mole: Check the settings before first use, AC frequency and voltage can only be adjusted after AC output is turned off. Voltage and frequency reference: EUNICE 2I0WE0HZ A 240W/50HZ Data This section provides all basic information including product, inverter and charger, battery, and alarm history.
Generator Charging Connect AWACS to the generator via the charging cable®. *Sold separately. Mater SLUTTY! recommends an inverter generator that delivers at least S000W pre sine wave A power, Voltage and frequency limit: EU AUK 195.
PV Charging AC500 supports dual PV input with the DC input cable. Connect the solar panels (in series or parallel) to AC500 and CHECK the PV connection on LCD screen. (side) (DC Input Cable} Note: Please rake sure your soar panels aT each rout corpora with: TIO Oversampling Dower 1S00W Max. Eg. Connect three BLUET) PEEVE solar pane's in serfs to DC or DCZ BLUET EAVESDROP Voos465Y vmpsB78Y Curtailment Max. Total Current's Max, ©00V: Open circuit voltage, also for Voc.
Car Charging Connect the AC500 to the vehicle plug-in cigarette lighter port via the DC input cable and car charging cable. Note: Set the ‘Others as DCVDC2 Input source to enable car charging. The Max. input current is B2A, Lead-acid Battery Charging Connect the AC500 with the lead-acid battery via the DC input cable and lead-acid battery charging cable.® Note: Set the ‘Others’ as DCVDC2 input source to enable lead-acid battery charging.
Dual Charging Set the ‘PV' as DCI/DC2 input source to enable AC/Generator + PV Charging. Set the ‘Others’ as DCI/DC2 input source to enable AC/Generator + Adapter/ Battery Charging. Turn on the ‘PV Parallel Enable’ to enable excessive PV <150V).
Capacity Expansion AC500 supports up to 6 expansion batteries for a total of 18.432Wh capacity. Connect AC500 to B300S via the P150D battery expansion cable, or B300 via the P150D to POD cable, For more details, please refer to B300S or B300 User Manual, Mote: {there's only one BEIGE connected, the corncob delivers a maximum output of A500W. To get SO00W output, please connect at least one expansion battery to each expansion port.
Creed-tied UPS: JJ Unimportant Load Utility Power Important Load Main Panel I Transfer Switch AC Input * The grid-tied UPS should be built by a qualified electrician. Please contact BLUETS Customer Service for details. AWACS has 4 UPS meres-Standard, Time Control, PV Priority, and Customized UPS, and Bluet's UPS made guide is as follows: 1. The standard UPS mode is good for regions with unstable grid power supply. 2.
BLUETS APP Download the app from App Store or Google Play and follow the BLUETS APP INSTRUCTIONS to better control and monitor the AWACS + B300S combo. Power Lifting Mode This mode can be enabled in BLUETS App. When on this mode, the combo can power high drain pure resistivity while the rated output power remains SO00W. Mate: Make sure the combo disconnects the grid and the B300S doesn't overload. Tre AC BOD detects the resistance of devices and adjusts the sutputvaltage automatically.
Appendix FAQs (Frequently Asked Questions) Q Can | use third-party solar panels to charge this product? A Yes, you can. As long as the specs of solar panels on DC1 or DC2 input fall in below range: OCVaVMp: 12-150V Input Power: 1500W Max. With the same power connector (MC4} Q Why can't the unit be charged when the solar panels are connected? A: Please follow below steps: 1) Press the ‘PV' on LCD screen to check whether the solar panels are connected successfully.
