User`s guide

4000/5000 Modems’ User Guide

Test

To test the power connection, check the PWR light on the modem: if it is turned ON

then the modem is powered. If it’s OFF, review the installation procedures.

If LED indicators are not accessible to the installer a personal computer can be used to

verify it’s functionality by running BVDM.

IO Cable Wiring

The 15-foot 10-pin IO cable is available for purchase from BlueTree.

On one end of the cable is the Molex plug as shown in the figure below, on the other

end, the wires are stripped for easy connection to your equipment or sensors.

Pin Color Label Description

1 BLUE DI3 Digital Input #3

2 ORANGE DI1 Digital Input #1

3 GREEN O1 Digital Output #1

4 BROWN AI3 (4600/5600 only) Analog Input #3

5 GRAY AI1 Analog Input #1

6 VIOLET DI4 Digital Input #4