User`s guide

4000/5000 Modems’ User Guide

If Mobile IP settings are to be set, then click on Mobile IP and verify the right settings

needed. The RF module is set to operate in Mobile IP Preferred mode. Typically, a user

could alter that setting to Mobile IP Only mode if desired.

Telus

Enter the Master Lock Code, the phone number, and the MSID, then hit Submit.

Note that has to be entered, even if it’s the same as the phone number.

Test your activation

Once the process above is completed, go to File > Diagnostic: you should see the valid

modem’s phone number displayed.

Connection Profile Setting

Go to File > Connection Profile in order to configure the Modem’s WAN connection.

Enter #777 as a Dial String to establish a packet data call (1xRTT or EVDO).

Enter Username and Password as provided by your wireless service provider.

For PPP Protocols, make sure both PAP & CHAP are selected.

Select Always On in order to set the modem to connect automatically to the network

upon power up and maintain this connection.