User`s guide

2. Download the firmware files
Download the latest standard firmware package files from www.bluetreewireless.com, and
extract the zip file to a folder on your hard drive. It should contain a file named abt_ver-
sion.upd and a file named kbt_version.upd as well as a document containing the same up-
grade instructions as this appendix.
3. Perform the abt firmware upgrade
Figure 30
1. Navigate to CONF (Modem Configuration) > Firmware.
2. Click the magnifying glass icon and locate the abt_version.upd file from the
package that you extracted at step 1.
3. Click Upgrade.
4. Wait for BlueVue Device Manager to confirm that the firmware update was
completed. If the upgrade is being performed locally, it should approximately take 2
minutes. If it the upgrade is being performed remotely, then it could take up to 5
minutes depending on upload speed.