User`s guide

4000 & 5000 Series User’s Guide

If using a serial cable:

1. Select Serial

2. Select the COM port in the dropdown list, then click OK

If using an Ethernet or USB cable:

1. Select Modem IP

2. Enter the appropriate modem IP then click OK. By default, the DHCP-assigned IPs will

be 192.168.0.1 for Ethernet and 192.168.111.1 for USB. If using USB, the driver

must be installed as explained in section 2.

If connecting to a remote modem:

1. Select Remote Configuration and click OK. A new panel will open to the left of

BlueVue Device Manager.

2. Right-click Available Modems in the panel

3. Click Add…

4. Enter the modem’s information, then click OK. The description is optional.

5. The modem will be added to the list of Available Modems, which will be saved for easy

access in the future. Double-click the modem name in order to connect to it.

Figure 7