User's Manual

Appendix B: Reference Information
V1.5 BlueTree Wireless M2M Express Product Manual 49
Command Description
A Answer a call
D Mobile-initiated call to dialable number
E Set echo mode
H Disconnect existing connection
I Display product identification information
O Switch from command mode to data mode
Q Set result code presentation mode
SO Set number of rings before auto answering the incoming call
S3 Set termination character for a command prompt
S4 Set response formatting character
S5 Set editing character for a command prompt
S6 Set pause before blind dialing
S7 Set number of seconds to wait for connection to complete
S8 Set number of seconds to wait when there is a comma dial modifier
S10 Set disconnection delay after indicating the absence of data carrier
S12 Set the escape code guard time
S13 Set the disconnection delay after a call has been terminated
V Set result code format mode
X Set CONNECT result code format and call monitoring
Z Set all current parameters to a user defined profile
&C Set circuit Data Carrier Detect DCD function mode
&D Set circuit Data Terminal Ready DTR function mode
&F Set all current parameters to manufacturer defaults
&V Display current configuration
&W Store current parameter to user defined profile
+GCAP Request complete terminal adapter capabilities list
+GMI Request Manufacturer ID
+GMM Request TA Model ID
+GMR Request TA Revision ID
+GSN Request TS Serial Number ID
+ICF Set TE-TA Control Character Framing
+IFC Set TE-TA Local Data Flow Control
+IPR Set Fixed Local Rate
+CBST Select Bearer Service Type