User's Manual
Table Of Contents
- _
- FCC Compliance and Industry Canada Statement
- Liability Notice
- Safety
- Chapter 1: Package Contents
- Chapter 2: Product Description
- Introduction
- Modem Views
- _
- Summary of Specifications
- Indicators Lights (LED)
- Data Interface Specifications: Serial, USB, Ethernet
- General Purpose Input and Outputs Specifications
- Power Specifications
- Chapter 3: BlueVue Device Manager
- Chapter 4: Wireless WAN Setup
- Chapter 5: LAN Setup
- Chapter 6: IP Networking Features
- Chapter 7: Serial IP – Packet Assembly Disassembly
- Chapter 8: GPS Settings
- Chapter 9: IO Management
- Chapter 10: Event Reporting
- Chapter 11: Firmware Upgrade
- Chapter 12: Hardware Installation
- Appendix A: Warranty and Support
4000/5000 Modems’ User Guide
7 YELLOW DI2 Digital Input #2
8 RED O2 Digital Output #2
9 BLACK GND GROUND
10 WHITE AI2 Analog Input #2
Mounting the modem
For mounting, the modem requires four #4 screws (3/16”) pan or fillister head, as well
as corresponding lock washers
Revision 1.0 Copyright © 2004-2006 BlueTree Wireless Data Inc. Page 43 of 44