User's Guide

Draft 1 BlueTree Wireless BT-4600/BT-5600 Product Manual 24
To test the power connection:
1. Check the modem’s LED indicators.
• If the PWR or Power indicator is turned on or if it flashes, the
modem is powered.
• If the PWR or Power indicator is not turned on, review the
installation procedures or see Troubleshooting section.
2. If LED indicators are not accessible to the installer a personal
computer can be used to verify it’s functionality.
• Start BlueVue Device Manager, it will automatically detect the
modem (refer to BlueVue Device Manager section).
• BlueVue Device Manager is not available initiate a Windows
HyperTerminal session and execute the AT commands shown
in Appendix C.
6) Connecting the Data Cables
Connecting the Serial data cable:
1. Connect one end of a serial cable to the modem at the connector
labeled RS-232.