User's Guide

Draft 1 BlueTree Wireless BT-4600/BT-5600 Product Manual 22
5) Installing the Power Cable
The modem includes a 15-foot power cable with 2A in-line fuse.
Power cable connector
As shown below, the power cable connects to the modem through a
Molex type connector (MiniFit 4-pin).
The ignition sense line (white wire) acts as an ON/OFF power switch.
The modem will turn on when the ignition sense line is set between 8
and 30 volts DC. The modem will turn off if the ignition sense line is
less than 5 volts DC.
Pin designations for the connector are shown below.
Pin Annotation Color Description
1 GND Black Ground
2 POS Red Power supply input 5 to 30 Vdc