User's Guide

Draft 1 BlueTree Wireless BT-4600/BT-5600 Product Manual 20
Chapter 4: Installing the Modem
Installing the modem is a nine-step process:
1. Unpacking the modem
2. Mounting the modem
3. Installing the cellular antenna
4. Installing the GPS antenna (BT5600 model only)
5. Installing the power cable
6. Connecting the data cables
7. Configuring the modem
8. Connecting to a wireless network using the serial port (DB9)
9. Connecting to a wireless network using the Ethernet port (RJ45)
1) Unpacking the Modem
When the modem arrives, check that the package contains the
following items:
• BT4600 or BT5600BT-1000 1010 1100 1110 2000 2010 modem
• 15-foot power cable with 2A in-line fuse
• Extra serial number label
• Quick Start Guide
Any items missing from this list, please call your local representative.
2) Mounting the Modem
Place the modem in a location where you can connect the power,
antenna and data cables (refer to mechanical dimensions).
3) Installing the Cellular Antenna
• Cellular band antennas should be mounted more than 30 cm (12
inches) from other antennas.
• Do not install the antenna in a closed metallic enclosure (such as a
cabinet or the trunk of a car).
• For safety reasons, mount the antenna at least 30 cm (12 inches)
away from the body of a person.
• The length of the antenna cable may affect the signal strength.
Choose the appropriate cable type and length refer to table below.