User's Manual

ManualsBrandsBluetree Wireless Data ManualsElectronicsBT-GPRS-S

BT-GPRS-S

Installation Guide – Preliminary Wireless Data Modem

Rev A | Feb 2003, © BlueTree Wireless Data, Inc. Page 1 of 15

BT-GPRS-S Installation Guide

Preliminary

Table of Contents

Introduction....................................................................2

Standard Package Contents...............................................2

Safety and Hazards ..........................................................2

Limitation of Liability........................................................2

Patents..........................................................................2

Trademarks ....................................................................2

Product Overview.............................................................2

Data Connection..............................................................3

LED Status Indicators .......................................................3

Antenna Selection and Installation......................................4

Power Connection ............................................................5

Product Activation............................................................6

Step – 1: Powering-up the modem ..................................6

Step – 2: Activating the cellular unit on the network...........6

Step – 3: Programming the phone number........................6

Step – 4: Testing the modem .........................................6

Product Operation ............................................................6

Mobile Terminated Call ..................................................6

Mobile Originated Call: ..................................................6

GSM circuit-switched data or GPRS packet-switched data....6

SMS Mobile Originated/Terminated ..................................6

SIM Card Installation........................................................7

Product Configuration – AT Commands ................................8

Installing the Modem Driver (WinXP)...................................9

Creating a Dialup Networking Session (WinXP)....................10

Customer Support..........................................................13

Warranty......................................................................13

Technical Specifications ..................................................14

Regulatory Information ...................................................15

Summary of content (15 pages)

PAGE 1
BT-GPRS-S Installation Guide – Preliminary Wireless Data Modem Table of Contents BT-GPRS-S Installation Guide Preliminary Rev A | Feb 2003, © BlueTree Wireless Data, Inc. Introduction....................................................................2 Standard Package Contents...............................................2 Safety and Hazards ..........................................................2 Limitation of Liability ........................................................2 Patents ...........
PAGE 2
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Introduction warranties, express or implied, with respect to the content of this document. The BT -GPRS-S is a fully integrated GSM modem, which adds wireless GPRS functionality to remote and mobile applications.
PAGE 3
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Data Connection Table 1 Pin The BT -GPRS-S is configured as DCE (Data Communications Equipment) and uses the standard RS232 9-pin designations. Two RS232 serial ports are available, each with a DB9 female connector: MAIN – Port 1: connects to a data terminal such as a computer, RTU, etc. AUX – Port 2: intended for field diagnostics and future consideration. Both Port 1 and Port 2 support speeds from 9600 bps up to 115.2 kbps.
PAGE 4
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Antenna Selection and Installation WARNING – Only approved antennas may be connected to the modem. To comply to FCC regulations, only antennas meeting the following specific ations should be used: • • • • • • • Rated gain of 3dBd Minimal cable loss of 0.5dB Dual-band 800 & 1900 MHz Nominal 50 ohm impedance Male TNC connector Coil style cellular whip Mount designed for a horizontal metal surface of vehicle.
PAGE 5
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Power Connection Table 3 Pin Power connector Annotation Description 1 GND Ground 2 POS Power supply input 8 to 30 Vdc 3 IGN Ignition input 4 OUT #1 Digital output (horn alert) How to install the power cable Use a 12 volt DC power supply with the BT -GPRS-S. The power cable connects to the modem with a Molex type connector. The part number of the connector for the cable is 39-01-2040 (alternative part number 39-01-2045).
PAGE 6
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Product Activation Step – 4: Testing the modem Step – 1: Powering-up the modem n n n n Connect the external antenna to the modem Connect a power source of 12Vdc @ 1A to the power terminal – GND to pin 1 and POS to pin 2 To turn ON the modem, apply a 12Vdc to the IGN pin PWR LED on the modem should light-up in red For automatic power-up, put a jumper between the IGN pin and the POS pin Step – 2: Activating the cellular unit on the network 1
PAGE 7
BT-GPRS-S Installation Guide – Preliminary Wireless Data Modem SIM Card Installation To install or change the SIM card, follow the next steps: 1- Unscrew the front plate (connectors’ side) from the enclosure 4- Open the SIM holder and insert the SIM card into it 2- Slide the board with the front plate attached out of the enclosure 3- On the back side of the board, you will find the RIM 1902G module with on-board SIM holder Rev A | Feb 2003, © BlueTree Wireless Data, Inc.
PAGE 8
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Product Configuration – AT Commands The modem can be configured by AT commands using a terminal such as HyperTerminal. The complete list of supported AT commands is available from BlueTree Wireless Data. The following commands can help you verify the modem connection prior to setting up a dialup connection.
PAGE 9
BT-GPRS-S Installation Guide – Preliminary Installing the Modem Driver (WinXP) Wireless Data Modem Select (Standard Modem Types) as the Manufacturer Select Standard 33600bps Modem as the Model Click Next Go to Control Panel à Phone and Modems Select the Modems tab Click Add… to install the modem driver Select the COM port to which the modem will be attached Click Next The Hardware Wizard will start Check the box labeled “Don’t detect my modem” Click Next The modem is now added to your list of availabl
PAGE 10
BT-GPRS-S Installation Guide – Preliminary Creating a Dialup Networking Session (WinXP) Wireless Data Modem Select to setup the connection manually Click Next Go to Control Panel à Network Connections Click on Make A New Connection The following Wizard will start Select Connect to a dialup modem Click Next Select Connect to the internet as the type of Network Connection Click Next Rev A | Feb 2003, © BlueTree Wireless Data, Inc.
PAGE 11
BT-GPRS-S Installation Guide – Preliminary Select the 33600bps modem driver Click Next Wireless Data Modem Enter the phone number for the GPRS service This number is supplied by the local cellular provider Example: enter *99***1# Click Next Enter a name for your connection Click Next Enter the username and password for this connection, given by your cellular provider. Example: for service provider “WirelessCarrier”, username is “wapuser1” and password is “wap”.
PAGE 12
BT-GPRS-S Installation Guide – Preliminary Wireless Data Modem The following connection to your wireless service provider is now created à Click on Properties to verify the setup. Rev A | Feb 2003, © BlueTree Wireless Data, Inc.
PAGE 13
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Customer Support Help Desk Sales Desk Warranty Toll Free: 1- (U.S. and Canada) Phone: (514) 422-9110 x496 Hours: 09:00 - 17:00 Eastern Time Email: support@bluetreewireless.com Phone: (514) 422-9110 Hours: 09:00 - 17:00 Eastern Time Email: sales@bluetreewireless.com Post BlueTree Wireless Data, Inc. 2405 46th Avenue Lachine, QC, Canada H8T 3C9 Fax (514) 422-3338 Web www.bluetreewireless.
PAGE 14
BT-GPRS-S Wireless Data Modem Installation Guide – Preliminary Technical Specifications Shock MIL-STD-810E M516.4 Pr I Function shock Vibration MIL-STD-810E M514.4 Ca 1 Basic Transpo. Air-Interface Standards GSM/GPRS Data rates over the air 171.2 kbps (theoretical) Frequency bands 850/1900MHz Dual-frequency Serial Port speeds 1200 to 115200bps Host Interface RS232 serial port Receiver sensitivity 1900MHz: -106.
PAGE 15
BT-GPRS-S Installation Guide – Preliminary Regulatory Information FCC Compliance Statement (USA) FCC Class A Part 15 FCC ID: QWV- BTGPRS This section applies to the BlueTree Wireless Data modem BT-GPRS-S. The device complies with Part 15 of the FCC rules. Operation is subject to the following twp conditions: Wireless Data Modem • Consult the dealer or an experienced radio/TV technician for help. WARNING – "Antenna must not exceed 5.15 dBi. This device must be used in mobile configurations.