User's Guide

ID: 000.000.032.920
Version: 1.0
User Guide: [Bluetooth IF Excalibur]
Filename: 000.000.032.920_UserManual.docx
Uncontrolled Copy if Printed
Page 4 of 6
Red
A fatal error occurred. The device requires a
power cycle.
Yellow
PC to Excalibur communication error detect
Light blue
Homologation functionality active
4.2.2 Firmware update mode
The description of the LED color meaning is shown in Table 2Table 1.
Table 2 Color-to-Status mapping in normal mode
Color
Status
White
Excalibur is ready to operate
Light blue
The firmware update process is active
Red
A fatal error occurred. The device requires a
power cycle.
Yellow
The firmware update process is ongoing
Purple
The firmware update was not successful
Green
The new downloaded firmware is up and
running
5 Maintenance
Excalibur is an electronic equipment, and it should be used with care.
Avoid all kind of drops of the device.
Keep the device housing clean.
Disconnected the USB cable and the RF antenna from the device before any cleaning operation on
the device.
Clean with a dry tissue only.
Do not use water or any detergent.
6 Disposing
The device is a Waste Electrical and Electronic Equipment (WEEE), and has to be disposed
according to the this directive.
7 Troubleshooting
See the LED behavior description in chapter 4.
8 Labeling
The following figures are showing the labels of the Excalibur product.