Manualshelf

User's Guide

ManualsBrandsBluetooth IF Excalibur ManualsComputers & AccessoriesWireless communicator with hearing devices
123456
ID: 000.000.032.920
Version: 1.0
User Guide: [Bluetooth IF Excalibur]
Filename: 000.000.032.920_UserManual.docx
Uncontrolled Copy if Printed
Page 3 of 6
It can be used by any Sonova brand.
The use of the Excalibur is restricted to Operation Centers (OCs) and Group Companies (GCs).
The Excalibur is intended to be installed and operated by trained personal only.
The operator will not be in permanent contact with the Excalibur device.
The Excalibur is used to communicate with the DUT, during manufacturing processes and only
during that period time.
The Excalibur device:
• establishes a wireless connection with the DUT, and a wired connection with the computer
controlling the test
• sends and receives data via Bluetooth BLE, using a Sonova specific profile only
• allows configuration and programming of DUT during manufacturing tests
• is re-usable for future HI generations of the Sonova AG
• has LEDs for visual feedback about its power state and its status
• can be used by all Sonova Hearing aids brands
• does NOT process any personal data, therefore no further detailed privacy impact assessment
is required
2.2 Electromagnetic waves emission
The device is conform to the required standards for Europe (CE), USA and Canada (FCC/IC),
China (CCC) and Vietnam.
2.3 Electrical safety
The device is conform to the required standards for Europe (CE), USA and Canada (FCC/IC),
China (CCC) and Vietnam.
3 Installation
Excalibur shall be installed in a ESD protected environment only.
3.1 Connecting to power supply / PC
To connect the Excalibur to the PC, make exclusively use of certified USB-IF cables.
Ensure that the used PC is properly connected to earth on its power supply lines.
4 User interface
4.1 Power supply status
When the USB cable is properly connected to the device and to a PC, and the power is within the
correct range the LED turns on in a light-green color.
4.2 Status LED
4.2.1 Normal mode
The description of the LED color meaning is shown in Table 1.
Table 1 Color-to-Status mapping in normal mode
Status
Excalibur is ready to operate
Excalibur is busy