User's Guide

ID: 000.000.032.920
Version: 1.0
User Guide: [Bluetooth IF Excalibur]
Filename: 000.000.032.920_UserManual.docx
Uncontrolled Copy if Printed
Page 2 of 6
1 Introduction
In Figure 1 the assembling parts of the Bluetooth IF Excalibur (Excalibur in short) are displayed.
Figure 1 Excalibur parts
1) Enclosure 3) Excalibur printed circuit board (PCB) 5) LED pipes holders
2) Status LED 4) Power supply status LED 6) DIN Rail holder
2 Read before use
2.1 Intended use
Excalibur is a device / equipment that is used in the test field of the production of Hearing Instruments
(HI) to transfer data between the device under test (DUT) and the computer controlling the test. The
data transfer between the Excalibur and the DUT is done via Bluetooth Low Energy (BLE). The data
transfer between the Excalibur and the computer controlling the test is done via a wired USB
connections.
The Excalibur is powered via the USB connection from the computer controlling the test.
The Excalibur is compatible to all Sonova wireless Boston HI devices and future Bluetooth HIs based
on BLE.