Operation Manual

1
2. Getting Started
GPSNavigator6 is a good choice for in-car navigation. You can easily use it by tapping the screen or drawing the map with
your fingers.
2.1 Quick Reference
This chapter gives you a brief introduction of how to use GPSNavigator6. Before we explore all the detailed functionalities
provided by this application, please make sure that:
 GPSNavigator6 searches for positioning information from at least three satellites and your position is fixed once
the application starts.
When you use the GPS receiver for the first time, it may take 2-3minutes to secure satellite information and orientate
accurate position (Cold start). Your position fix is stored in the memory. For subsequent use of the GPS receiver, it will
only take 1-3 minutes to locate your position (Warm start). Once your position is fixed by the GPS receiver, the system
starts navigation immediately without any extra operation when you start the application.
2.2 Getting Started
◎ When start GPSNavigator6 for the first time, system
enter “System Attention” screen.
◎ It takes about 15s to automatically switch “System
Attention” screen to “Welcome” Screen and then enter “Free
Navi Map"(Picture 2.3).
Picture 2.1 System Attention Screen
Picture 2.2 Welcome Screen