Operation Manual

33
6.5 Day /Night Mode Switch
GPSNavigator6 provides manually or automatically adjust map color scheme to the different lightness of the day or night.
◎ When “Manually "turns on, you could switch map mode
between Day and Night. Manually switch function disable
automatic switch, vice versa.
◎ When “Automatic "turns on, you need to set daytime.
Daytime could be set to start from “1:00AM-12:00AM" and end at
“1:00PM-12:00PM".
6.6 Set Home Address
◎ touch “Set Home Address” and enter “Search Menu” screen,
more operation steps please refer to chapter 3.
6.7 GPS Status
◎ In the “Settings” screen (Picture 6.3), touch on “GPS Status”
to display the “GPS status” screen (Picture 6.15).
You also could touch on “Route Navi Map” or “Free Navi
Map” to access GPS Status.
In the “GPS status” screen, you can get below information:
1. The GPS be active: GPS has fixed current position.
The GPS be inactive: GPS does not fix a position.
2. The position of satellites: the relative orientation of satellites to
current position fix;
Picture 6.13 Day/Night Mode Switch
Picture 6.15 GPS Status
Picture 6.14 Settings