Operation Manual

29
5.5 Go to
◎ When you want to change destination or add waypoint(s), click
“Go to” and enter Search Menu(please refer to Chapter3).
5.6 Terminate
By touching the button “Terminate", the system will stop navigation and enter Free Navigation Map.
5.7 Auto-routing
With the consideration of driving safely, GPSNavigator6 provides the auto-routing function that works under two
circumstances:
◎ Auto starting navigation: After setting up a destination, touch on “Go” in the “Route Plan” screen and GPSNavigator6
will automatically start the navigation. Below we will describe the procedure:
1. Proceed to the next step if GPS signals are received. Otherwise, wait for receiving GPS signals;
2. Set the current GPS position as starting point, use the optimal route and start navigation.
◎ Auto re-routing: If you have accidentally missed a recommended turning point about 100 meters, GPSNavigator6 will
activate re-routing module to calculate a new route. This guarantees you will never get lost.
Picture 5.13 Recalculate