Operation Manual

22
4.1.3 Display destination on map
◎ In “Route Plan” screen, touch and enter the map
location of the highlight waypoint/destination. Here allow you:
a. To pin on map and check information of the
waypoint/destination.
b. To zoom out/in;
c. To draw map in all directions
4.2 Route Options
GPSNavigator6 offers you optimization settings of navigation. These settings are the basis parameters for calculating the
route.
◎Touch on “Route Plan” screen and enter “Route
Options” screen(Picture 4.3).
GPSNavigator6 enable user to select road type and routing style according to different navigation situations.
The default setting is Fast car mode, Quickest Route and Prefer Motorway, Ferries and Toll. You may touch each parameter
to change the mode or style.
(1) Road type:
: Use of Motorway: most use of Motorway Use of Motorway: least use of Motorway
: Use of Ferries: most use of Ferries Use of Ferries: least use of Ferries
: Avoid Toll Roads Avoid Toll Roads: allow toll roads
Picture 4.3 Route Options
Picture 4.2 Destination on Map