Operation Manual

21
4. Route Plan
With GPSNavigator6 you can enter the desired destination (as described in Chapter 3) and also specify how the route to be
calculated.
GPSNavigator6 enables to three waypoints during navigation. The system calculates a proposed route according to the
sequence of the waypoints you specified, and guides you to the final destination.
After you enter waypoints/destination, the system enter “Route Plan" screen. This chapter will describe all the functions of
this screen.
4.1 Destination Management
4.1.1 Add or delete destination(s)
GPSNavigator6 allows you to add up to three waypoint and destinations. Usually the start point is the GPS-fixed current
position.
: touch it and enter “Search Menu” to search waypoint/destination(refers to Chapter 3).
: touch it and the highlight waypoint/destination in yellow is deleted.
4.1.2 Change the sequence of destination
: touch it to move up the highlight waypoint/destination.
: touch it to move down the highlight waypoint/destination.
Gray key means the function is disabled.
Picture 4.1 Route Plan