Operation Manual

18
3.5 Search a destination by Coordinates
If you know the geographic coordinates of your destination, you can navigation to the desired location by entering
Coordinates.
1. Touch “Coordinates" on “Search Menu screen;
◎ In the “Search Menu” screen (Picture 3.40), select
“Coordinates” to enter the “Coordinates Input” screen (Picture
3.41).
2. Touch “Format” to change the type of coordinates;
GPSNavigator6 supports two kinds of coordinate format inputs: Degree Format (Picture 3.41 and Digital Format (Picture
3.42). You can touch the “Format” button to switch between these two formats.
3. Enter the coordinates and touch “OK".
In the Degree format, touch the “Lon” (Longitude) input area (Picture 3.41 You should input “E” (East Longitude) or “W”
(West Longitude) before you input the degree number of the longitude. Before inputting the degree number of the latitude,
you should input “N” (North Latitude) or “S” (South Latitude).
In the Digital format, you should input “-” (West Longitude/South Latitude) before you input the digital number of the
longitude or the latitude.
Picture 3.40 Search Menu Screen
Picture 3.42 Digital Format
Picture 3.41Degree Format