User's Manual

Table Of Contents

BLUETOOTH STEREO HEADPHONE

–

USER MANUAL

Using with the Bluetooth-enabled Mobile Phone

Besides the stereo wireless transmission, the i-PHONO PLUS headphone can be

used for mobile hands-free communication with mobile phones which support either

the Headset or Hands-free profile of Bluetooth wireless technology.

You can answer or make a phone call via the i-PHONO PLUS headphone with the

Bluetooth-enabled mobile phone while you are listening to music. Once you end the

call, the stereo streaming will come back automatically to the headphone.

Step-1: Follow “Pairing” procedure to put the i-PHONO PLUS headphone in the

pairing mode (page14). If the headphone is already on, please disconnect all

Bluetooth services between the headphone and other devices in advance.

Step-2: Follow the operating instruction for your Bluetooth mobile phone to start the

pairing process. Typically, this is done by going to a ”Connect” or “Setup” menu and

then selecting the options to search the headphone that is still in the pairing mode.

Step-3: The mobile phone’s display should indicate to you that it found the headphone

named “iPHONO PLUS” and ask if you want to pair it. Please press the corresponding

button such as “Ok”, “Yes” or “Accept” to confirm this action.

Step-4: The mobile phone’s display should then prompt you for a passkey or PIN.

Enter 0000 (a sequence of four zeros) and the display should prompt the pairing result.

If the pairing is unsuccessful, please turn off the headphone and turn it on again. Then,

return to Step-1 and do the pairing procedure again.

< Answer a Call >

Step-1: If there is an incoming call while you are listening to the streaming music, both

the mobile phone and the headphone will ring simultaneously.

Step-2: Please press the Multi-functional button of headphone once to answer the

call.