User's Manual

Table Of Contents

BLUETOOTH STEREO HEADPHONE

–

USER MANUAL

Using with the Bluetooth-enabled PDA

You can use the i-PHONO PLUS headphone’s stereo (A2DP) and remote

control (AVRCP) functions with the Bluetooth-enabled PDA which

answers the following requirements:

z Microsoft

Windows Mobile™ 2003 Second Edition or later

z Windows Media Player 9 or later

z Both Bluetooth hardware (embedded chipset) and software (stack)

support A2DP (Advanced Audio Distribution Profile) and AVRCP

(Audio Video Remote Control Profile)

Please turn on the Bluetooth radio of your PDA and put the i-PHONO

PLUS headphone in the pairing mode beforehand. (page14)

Step-1: Open “Bluetooth Manager” and tap “High Quality Audio setup”.

Step-2: An icon named “iPHONO PLUS” will appear. Tap this icon.

Step-3: When the PDA discovers the i-PHONO PLUS headphone for the first

time, you may be prompted for a passkey. Enter 0000 (a sequence of four

zeros) and tap “OK”