User's Manual

15
BLUETOOTH STEREO HEADPHONE
–
USER MANUAL
E
ng
li
s
h
Using with the Bluetooth-enabled Computer
You can use the i-PHONO PLUS headphone’s stereo (A2DP) and remote
control (AVRCP) functions with the Bluetooth-enabled computer which
answers the following requirements:
z Windows XP O.S.
z Both Bluetooth hardware (embedded chipset or USB adapter) and
software support A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control Profile)
The following instruction used BLUETAKE BT007Si Bluetooth USB
Adapter and IVT BlueSoleil Bluetooth Software v1.6.1.4 to demonstrate
the general procedure.
<Pairing>
Step-1: Follow “Pairing” procedure to put the i-PHONO PLUS headphone in
the pairing mode. (page14)
Step-2: Open the Bluetooth software and search the i-PHONO PLUS
headphone. Then, you will find out a headphone (headset) icon named
“iPHONO PLUS”. Select the device to pair with the computer.
Step-3: Afterward a dialogue box will prompt you for a passkey or PIN. Enter
0000 (a sequence of four zeros) in the dialog box and then click on “OK” or
“Confirm”. After the pairing is completed, the headphone (headset) icon will be
marked.
Step-4: Double click on the marked headphone (headset) icon, and then you
can discover the Bluetooth service (function) provided by the i-PHONO PLUS
headphone.