Use and Care Guide

CLEANING

The electric wall oven’s eco-friendly Continu Clean™ works every time

the oven is turned on, helping to keep your oven clean by removing oils

and vapors without extreme temperatures or harsh cleaning chemicals.

When your oven interior becomes heavily soiled, use the self-cleaning

cycle to clean your oven.

 Turn on ventilation to remove excess smoke or

fumes that might be produced.

 Remove large built-up food particles and grease

before starting the Oven Cleaning Cycle.

 Do not use water or other solvents on the Bake

Stone to clean.

 Remove the roast probe from the oven.

 Remove the oven racks and glides. Wash by hand

or in the dishwasher.

 The Bake Stone can be left in the top oven during

the Oven Cleaning Cycle if it has been pre-dried.

 The oven, including the oven doors, will get hot

during the Oven Cleaning Cycle.

 Do not touch the oven or open the oven door during

the Oven Cleaning Cycle.

1. Select Top Oven or Bottom Oven from the Home screen. Remove

oven probe from oven to prevent damaging it.

2. Press Cleaning on the Main Menu display. Figure 1

3. Press Start on the Oven Cleaning screen to start the cleaning cycle.

Figure 2

4. The Cleaning in Progress screen will be displayed during the entire

cleaning cycle with a countdown timer that starts at 1:30. Figure 3

5. When the cleaning cycle is complete, the Cleaning in Progress

screen will display Exit. An alarm will signal twice and then once

every 10 seconds. Figure 4

6. Press Exit to return to the Main Menu. The oven will still be hot, but

is ready for use.

7. Press Cancel at any time on the Cleaning in Progress screen to stop

the cleaning process.

The oven will be hot if the Oven Cleaning Cycle is

cancelled mid-cycle. Do not open or touch the oven

doors.

Figure 1

Figure 2

Figure 3

Figure 4

TIPS

ATTENTION

WARNING