Owner's Manual

WARNING!
Steps to Factory Reset:
1. Disconnect the player from electrical power.
2. Wait 10 seconds
3. Reconnect the power
4.ź Uź2źØ¥¥źèsÃź¥Îźŭź²¬źÞ²ÎźÃźÉźÉο¬źLŘźÉ²Îźs¬ź²¥źÉź2ź8ÎÉź&²¬ź
(It will immediately turn Green and then back to Red) - do not let go of the LED.
5. Once the LED turns back to Red, continue to hold the button for 30 seconds.
6.ź É¿źņŃźÃ²¬ÃŘźÉź2źØ¥¥ź~¬źÉ²ź~¥¬£ź¿źŭźÉ¬ź¿¥sÃźÉź~ÎÉɲ¬ŝ
All customization to the Bluesound player will be removed and restored to factory settings.
IMPORTANT:źL«²×¬źÞ²Î¿źç¬¿ź¿²«źÉź2źsÉźs¬ÞźÉ«ź~²¿źÉź2ź~¬ÃźèsÃ¬ź¿źØ¥¥źs¬¥źÉź
factory reset and leave the player in Upgrade Mode. Just start the steps again to factory reset the player.
You will know the factory reset is successful if the player returns to Hotspot mode (wireless connection - the
LED will turn solid green). If the player is connected to your network through a wired Ethernet connection, it will
simply connect as if it was a new player (LED will turn solid blue).
THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK
CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE
THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING
AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT
AN AUTHORIZED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!