User's Manual

Declarations of Conformity and Regulatory Information
BlueSecure™ Access Point 1800 Installation Guide 29
National Restrictions
In the majority of the EU and other European countries, the 2.4- and 5-GHz
bands have been made available for the use of wireless LANs. Table 2 provides
an overview of the regulatory requirements that apply to the 2.4- and 5-GHz
bands.
Later in this section you will find an overview of countries in which additional
restrictions or requirements or both apply.
The requirements for any country may evolve. Cisco recommends that you check
with local authorities for the latest status of their national regulations for both
2.4- and 5-GHz wireless LANs.
The following sections identify countries having requirements or restrictions in
addition to those listed in Table 2.
Belgium
The Belgian Institute for Postal Services and Telecommunications (BIPT) must be
notified of any outdoor wireless link having a range exceeding 300 meters.
Bluesocket recommends checking http://www.bipt.be for more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan
300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten
en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens.
Les liaisons sans fil pour une utilisation en extérieur d'une distance supérieure à
300 mètres doivent être notifiées à l'Institut Belge des services Postaux et des
Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples
détails.
France
For 2.4 GHz, the output power is restricted to 10 mW EIRP when the product is
used outdoors in the band 2454 to 2483 MHz. There are no restrictions when
used indoors or when used in other parts of the 2.4 GHz band. For 5 GHz, the
frequency bands 5150 to 5350 MHz and 5470 to 5725 MHz will become fully
available by November 1, 2005. Until then, only the band 5150 to 5350 MHz is
available.
Check http://www.arcep.fr/ for more details.
Table 2: Overview of Regulatory Requirements for Wireless LANs
Frequency Band
(MHz)
Max Power
Level
(EIRP)
a
(mW)
a. Effective isotropic radiated power (EIRP).
Indoor ONLY
Indoor and
Outdoor
2400-2483.5 100 X
5150-53502
b
b. Dynamic Frequency Selection and Transmit Power Control is required in the
5250- to 5350-MHz and 5470- to 5725-MHz frequency range.
200 X
5470-57251 1000 X