User's Manual

8
• Install the BSAP in an area where large steel structures such as beams, pillars,
shelving units, bookcases, and filing cabinets do not obstruct radio signals to
and from the BSAP.
• Determine optimal AP placement using Bluesocket’s Wireless LANPlanner
software. LANPlanner enables network planners to import a map of the
facility, note the contents and construction materials, designate user regions
and applications to be used and place equipment. The designer then
interactively simulates how the wireless signals will propagate and fine-tunes
the network design with “what if” analysis to determine optimum
performance. Please consult Bluesocket’s web site for additional information,
and to download free trial software.
• Once BSAPs have been installed and configured, use site survey and
monitoring utilities supplied with the client adapters to test signal strength at
various locations. Modify the positioning of the BSAPs and client stations as
required for optimum performance.
Connecting and Powering the BSAP
Follow these instructions to connect your BlueSecure BSAP to your Bluesocket
WLAN and then power it up:
1. Make a note of the 12-character MAC address and the serial number listed
on the bottom of the BSAP before mounting the BSAP to a wall or other
surface. You will need this information during configuration.
2. Mount the BSAP to a horizontal surface or wall.
Mounting on a Horizontal Surface
To keep the BSAP from sliding on the surface, attach the four rubber feet
supplied with your BSAP distribution to the embossed circles on the bottom of
the BSAP chassis.
Mounting on a Wall
Refer to the mounting instructions in Appendix B.
3. Position the BSAP-1700 for best radio performance.
The BSAP-1700 utilizes a 6-element MIMO antenna panel under the top
cover of the unit. This antenna panel is made up of a combination of
horizontally and vertically polarized antenna elements, which should give
excellent performance regardless of the orientation of the AP. The BSAP-1700
should, however, be place where it has the best unobstructed view of the
coverage area. If possible, mounting the BSAP-1700 on the ceiling will
provide the best performance in a typical office environment. An optional
ceiling time mounting kit is available for the BSAP-1700, which provides for a
very esthetically pleasing and professional looking installation. For more
information, please refer to Bluesocket’s web site.
4. The BSAP derives its operating power directly from the RJ-45 connector when
connected to a device that provides IEEE 802.3af compliant Power over
Ethernet (PoE).