User's Manual

12
6. Enter 5 at the Network Cfg prompt to specify the BSC mode, i.e. how the
BSAP is to obtain the IP address of its home BSC.
You can set the BSC mode to either Discover or Static BSC.
Enter 1 to set the BSC mode to Static BSC.
7. Enter 6 at the Network Cfg prompt to specify the IP address of the BSAP’s
home BSC.
8. Enter 8 at the Network Cfg prompt to review the BSAP network configuration
settings you have made.
9. Enter h at the CLI prompt to return to the main menu.
Enter 2 at the main menu to apply your configuration changes, followed by 5
to reboot the BSAP and put the new configuration setting into effect.
When the BSAP completes its reboot, it will connect to and download its
configuration from the home BSC you have configured via the CLI.
General Specifications
Power Supply
Input: 100-240 AC, 50-60 Hz
Output: 48 VDC, 0.38A
Power consumption: 13.2 watts
PoE (DC)
Input voltage: 48 volts, 0.2 A, 9.6 watts
Note: Power can also be provided to the access point through the Ethernet port based on
IEEE 802.3af Power over Ethernet (PoE) specifications. When both PoE is provided and the
adapter is plugged in, PoE will be turned off.
Dimensions
Length: 9.75 in. (24.17 cm)
Width: 6.14 in. (15.60 cm)
Height: 1.56 in. (3.96 cm)
Weight
1.5 lbs. (0.68 kg)
LED Indicators
PWR (Power), Ethernet Link (Ethernet Link/Activity), .11a and .11b/g (Wireless Link/
Activity)
Network Management
Via BlueSecure Controller web-based Administrator Console and
local RS232 console
Temperature
Operating: 0 to 40 °C (32 to 104 °F)
Storage: 0 to 70 °C (32 to 158 °F)
Compliance
Electrical/Safety
UL 60950
CAN/CSA-C22.2