Owners manual

WS- 260 WIRE STRIPPING MACHINE
5
MACHINE COMPONENTS
Ø The main components of the WS-260 are the central cutting and rolling assemblies on
the left multi-blade side and the single channel rolling wheel and large blade on the
right side. These are both driven by a transfer case, a gearing system and a motor.
The safety guards are situated on top of both assemblies as well as in front where the
wire guide is situated. There are also safety guards on top of the main drive gear as
well as on the sides of the assembly bearing housings on the left and right. All of
these components are situated on a steel tray.
o The safety components must be not be removed except by a qualified
technician. Power must be disconnected prior to any service.