Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsWS-260 Wire Stripping Machine by BLUEROCK ® Tools
11121314151617181920
WS- 260 WIRE STRIPPING MACHINE
8
Round cable Sheathed flat cable Twisted flat cable Single-core cable
WIRE GUIDE DIAGRAM ON LEFT MULTIBLADE SIDE
RIGHT SINGLE-BLADE COMPONENTS
Ø This side has one primary adjusting point. This is the large round wheel handle on
the top of the lead screw. Turning the wheel clockwise will lower the main cutting
blade. Turning the wheel counter-clockwise will raise the cutting blade.
Ø Under the cutting blade is the main channel roller. This roller is driven by the motor
and transfer case. As the roller rotates, it will act as the pulling force to bring wires
into the cutting channel making contact with the blade.
o WARNING: DO NOT take off machine guards or channel roller. These are here
to protect the user from getting to close to the rolling and cutting blades
which could cause serious injury, death or dismemberment.