Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsModel MWS-808D Manual Wire Stripping Machine by BLUEROCK ® Tools
12345678910
MWS- 808D
5
MACHINE COMPONENTS
Ø The main components of the MWS-808D are the central cutting (top) and rolling
assemblies (bottom) which has the drill shaft. These are driven by human power
using a hand-wheel and hand-crank or by a user supplied chuck type drill. The safety
guards are situated on top of the assemblies as well as in front where the wire guide
is situated.
o The safety components must be not be removed except by a qualified
technician.
Ø NOTE: The drill shaft is most suitable for continuous smaller/medium size wires. It's
not made for continuous large wire operations. It can put excess stress on the shaft
over time making it vulnerable to breakage.