Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsBLUEROCK ® Tools Model 930 STRiPiNATOR® Machine Wire Stripping Recycler Stripper
12345678910
MODEL 930 WIRE STRIPPING MACHINE
4
Operations
Note
THOROUGHLY READ THROUGH THE ENTIRE MANUAL BEFORE
OPERATING THIS MACHINE!
PURPOSE
Ø The purpose of the 930 is to remove outer and inner jackets from wires and cables in
order to separate the inner copper or aluminum. These types of machines are widely
used in the recycling industry to extract copper and aluminum for recycling.
Ø The 930 has the ability to cut the top and bottom of larger wires, and the tops of
smaller wires.
o Note: These wire jackets can also to be recycled by many recyclers so inquire
with your local scrap buyers.
INSTALLATION
Ø Install the machine in a dry place.
Ø Set up in a manner so the user has access to both the front wire inlets and the back
wire outputs.
Ø Make certain the machine is firmly secure and stable so it will not tip or fall.
OPERATIONAL PRINCIPLES
Ø This machine pulls wire into the machine across an assembly of a set of four cutting
channel and rolling channels.
Ø The main cutting blade shafts and main rolling shafts run inversely to create a
mechanism that pulls the wire into front of the machine.