Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsBLUEROCK ® Tools Model 930 STRiPiNATOR® Machine Wire Stripping Recycler Stripper
891011121314151617
MODEL 930 WIRE STRIPPING MACHINE
11
7. Unscrew spanner nut clockwise. If you do not have a spanner nut wrench, it is possible to
use a pair of vice grips.
8. MAKE SURE YOU MARK THE SPACERS 1 THROUGH 5 (OR 1 THROUGH 9 FOR THE TOP
ASSEMBLY), SO THAT THEY GO BACK ON IN THE SAME ORDER THAT YOU TOOK THEM
OFF.
9. Blades are ready to come off and be replaced.
10. When re-assembling put the bearing back into the bearing housing before attaching the
housing to the cutter/roller.
11. Follow all other steps in reverse order to reassemble.