Owners manual

CG- 211C TORCH BURNER MACHINE
3
Specifications
ELECTRICAL DATA
Voltage
110V, 60Hz
Power Connection
US Standard 3 Prong Type B Plug
MECHANICAL DATA
Motor Forward or Reverse
Yes
Motor
DC Conversion in Control Box 70SZ08 6000RPM
Reduction Gear
Yes, 3 Pairs
Worrwheel
Yes, 1 Pair
Cutting Tip Types
G02, G03 (similar to Airco Brand)
Minimum Pipe Cutting Diameter
4-1/4” (108mm) and Above
Cutting Depth
Up to 2” Thick (5mm-50mm)
Cutting Speed
1/4”-30” Per Minute Variable Speed (50-750mm/min)
Cutting Precision
Less than 0.5mm on 17” (159mm) seamless steel pipe. Up to 1.5mm on
425mm seamless steel pipe.
Magnet Type
Permanent magnet (not an electo-magnet)
Magnetic Absorption Affinity
50KGS
Cutting and Beveling Surface Roughness
SHIPPING DATA
Shipping Weight
1) 37 lbs
Shipping Package Size
1) 26” x 13” x 9”
Included Accessories
DESCRIPTION
QTY
Instruction Manual
1
Control Box
1
Power Cord
1
Main Spreader Bar
1
Troch Bracket Assembly
1
Main Beam Spreader Bar Holder
1
G02 Oxy-Acetylene Cutting Tips
3
Note
UPON RECEIPT, CHECK CAREFULLY TO ENSURE THAT THE MACHINE IS IN GOOD
CONDITION AND HAS ALL ACCESSORIES LISTED ABOVE.
Chapter
2