Owners manual

CG- 211C TORCH BURNER MACHINE
1
Safety
DO NOT USE THIS MACHINE UNLESS YOU HAVE READ THE
OPERATING INSTRUCTIONS!
Welding safety glasses must be worn at
all times in work areas.
Long and loose hair must be
contained.
Appropriate steel toe footwear must be
worn.
Close fitting/protective leather
clothing must be worn.
Leather safety gloves should be worn at
all times and jewelry must not be worn.
Hearing protection should be
worn when using this machine.
Hard-hat must be worn while using
machine.
Dust/fume mask must be worn
while using this machine.
Read operational manual prior to use.
PRE-OPERATIONAL SAFETY CHECKS
Ø Examine the power cord and plug for damage. This tool is supplied with a ground plug and
must always be used with the properly grounded circuit.
Ø Examine the body of the machine and inspect for damage or defects.
Ø Examine the body and cords of the control box.
Ø Examine the cutting torch tips and torch barrel inside and out for damage and/or defect.
OPERATIONAL SAFETY CHECKS
Ø ONLY to be operated by qualified personal who have read instructions.
o NOTE: Failure to read and follow instructions could result in electrical shock, fire,
property damage and/or serious injury!
Ø DO ensure all non-essential people are clear of the immediate work area.
Chapter
1