Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsBLUEROCK ® Tools CG-211
891011121314151617
CG- 211C TORCH BURNER MACHINE
12
General Maintenance
Ø Inspect electrical cords and electrical connections.
Ø Keep machine clean and free of debris.
o Make sure to frequently clean metal scraps from the roll wheels.
Ø Check for misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
Ø When machine is not in use, place on a magnetic protection board in a dry place to avoid rust on
wheels and magnetic irregularity.
Ø Check to ensure the torch holder is clean and free of debris.
o Inspect the inside of the holder as well.
Ø Inspect all torch tips and ensure they are not damaged and the small cutting holes are clean.
Ø Inspect cutting hoses to ensure they are not damaged.
Ø DO NOT oil and connection points used in the gas/oxy system!
Ø If demagnetization occurs, remove the magnetic wheels and re-magnetize them.