Owners manual

MODEL 945- VS WIRE STRIPPING MACHINE
4
Operations
Note
THOROUGHLY READ THROUGH THE ENTIRE MANUAL BEFORE
OPERATING THIS MACHINE!
PURPOSE
Ø The purpose of the 945VS is to remove outer and inner jackets from wires and cables
in order to separate the inner copper or aluminum. These types of machines are
widely used in the recycling industry to extract copper and aluminum for recycling.
Ø The variable speed function on this machine allows for certain larger wires with
denser jackets to be stripped that other machines on the market can not strip.
Pulling the wire through slower allows for the blade to fully cut into the wire. This is
key in cutting softer/thicker rubber jacketed type wires.
Ø The 945 has the ability to cut the top and bottom of larger wires, and the tops of
smaller wires.
o Note: These wire jackets can also to be recycled by many recyclers so inquire
with your local scrap buyers.
INSTALLATION
Ø Install the machine in a dry place.
Ø Set up in a manner so the user has access to both the front wire inlets and the back
wire outputs.
Ø Make certain the machine is firmly secure and stable so it will not tip or fall.
OPERATIONAL PRINCIPLES
Ø This machine pulls wire into the machine across an assembly of a set of four cutting
channel and rolling channels.
Ø The main cutting blade shafts and main rolling shafts run inversely to create a
mechanism that pulls the wire into front of the machine.
Chapter
3