Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsBLUEROCK ® Tools 4"Z1 STAND Core Drill Stand
11121314151617181920
4”Z1DRILLING RIG
8
TRANSPORTING THE MACHINE
Ø When transporting the drilling rig, always use two hands.
Ø DO NOT transport the rig with bits in the spindle.
Ø If transporting inside a vehicle, it is recommended to transport it on its side so as to
avoid the item falling over.
Ø If transporting with the 4”Z1 attached, DO NOT carry the machine by the cord.
o DO NOT allow the cord or plug to drag along the floor when transporting.
RUNNING THE OPTIONAL 4”Z1 MACHINE USING THE DRILLING RIG
Ø Do all pre-operational and operational safety checks from Chapter 1.
Ø Consider your security and stability as well as the orientation of the machine in the
work area.
o Consider the work surface material, condition, strength, density and rigidity.
These factors directly affect the tools efficiency.
Ø Ensure the drill is secure in the drilling assembly by inspecting the C clamp assembly
and checking the tension on the C clamp bolts.
o Ensure the machines axis are parallel with the drill stand.
Ø Secure the machine base to the work surface by using a wedge anchor or other
method to ensure the base does not move.
Ø Use the four leveling bolts on the corners of the base to level the machine.
Ø After placing the machine in work area, connect a safety chain or strap if necessary.
o The safety chain should attach to the machine (preferably through the
carrying handle or O bolt) as well as attached to the work area in such a
manner that prevents the machine from detaching or falling from the work
area.
Ø Ensure the feed handles are securely attached to the feed spindle.
Ø Ensure the work surface is free of debris, oil, etc.
Ø Select the gear you will be using.
o Do not force the gear shifter when changing between gears. There is a
neutral position between gear 1 and gear 2.
o Change gears when the machine is stopped or almost stopped.
Ø Select and set up fluid delivery method or dust system.
Ø If using the machine horizontally with the water system, connect hose to the side of
the machine using the connector.
o This connector takes standard ¾” US garden hose hookup.