Data Sheet

10/10/2018 Fathom Spool Documentation
http://docs.bluerobotics.com/spool/#specifications 8/19
Use four threadlocked M5x12 screws and a 3.0 mm hex driver to attach the slip ring core to a ange. Note the screw
heads come through the plastic ange to screw into the aluminum slip ring core, and the long end of the core should be
passed through the central hole in the ange. Tighten the screws until they indent the plastic slightly.
Step 4: Adding the Spool Standos
For the standard version, use six threadlocked M5x12 screws and a 3.0 mm hex driver to secure the six spool standos
to the outermost holes on the inside face of the spool, facing the same direction as the long end of the core. Tighten the
screws until they indent the plastic slightly.