Data Sheet
10/10/2018 Fathom Spool Documentation
http://docs.bluerobotics.com/spool/#specifications 10/19
For the standard version, use three #8-1/4” self tapping screws and a #2 Phillips head driver to secure three nylon
clamps the inside face of the ange where the plug is located. The clamps should be mounted next to each other in the
second from outermost holes.
For the large version, use three #8-1/2” self tapping screws instead and a #2 Phillips head driver to secure the clips
against the face of the stiening ring. Match the stiening ring cutout pattern to the spool face.
Step 7: Combining the Flanges