Product Documentation

2017-10-01 RB-Blu-27
Introduction
The T200 Thruster is a low-cost high performance thruster for marine robotics. It was
originally launched in 2014 through a Kickstarter campaign.
Safety
Always practice caution when you’re working with electricity in water and with the spinning
blades of the propeller. Keep body parts away from the thruster inlet and outlet to avoid
injury.
Quick Start
1. Connect motor wires to ESC and connect the ESC to power and a signal.
2. Send a signal and the thruster will start spinning. That’s it.
Important Notes
Do not operate the thruster for extended periods out of water. The bearings are lubricated
by the water and vibration and noise will be greater when dry.
The thruster can handle saltwater and sandy environments pretty well, but it does not get
along with seaweed. Avoid sucking seaweed into the thruster to avoid damage.
A slight clicking noise is normal, especially when operated dry. It is caused by slight
movement of the shaft in the plastic bearings.