Product Documentation

2017-10-01 RB-Blu-27
Operation
The thruster requires a brushless electronic speed controller (ESC). If you are using the
BlueRobotics BasicESC [RB-Blu-125] or BlueESC, please see the appropriate product page
for instructions.
Important: Do not operate the thruster for extended periods out of water. The bearings are
lubricated by the water and vibration and noise will be greater when dry.
Clicking Noise
If you hear a clicking noise during operation, especially when operating in air, do not be
alarmed. It’s normal.
The thruster uses solid plastic bushings and due to the tolerances of the bushings and
motors shafts, the shaft can move slightly in the bearing. The noise is drastically reduced or
eliminated when operated in water. The water acts as a lubricant for the bearings and
smooths operation.