Data Sheet

7/31/2018 Lumen Light R2
http://docs.bluerobotics.com/lumen-r2/ 4/6
3. Attach the Lumen onto the screws and tighten until hand tight. Be careful to avoid over-tightening and stripping the
threads.
Daisy Chain Connection
The Lumen Light can be daisy chained (https://en.wikipedia.org/wiki/Daisy_chain_%28electrical_engineering%29) using the
following procedure:
 Use caution if you disassemble and reassemble your Lumen Light. The black screws are made of aluminum and will break
if over-torqued. We recommend using a torque wrench and applying no more than 20lbs of force when reassembling.
[Due to dierences in internal wire connections, New Instructions COMING SOON]