Datasheet

10/3/2018 Newton Gripper
http://docs.bluerobotics.com/newton-gripper/#specifications 11/17
5. With a hand powered drill and 5.50mm drill bit, drill straight holes in the indicated position markings.
6. Re-attach the 3” battery enclosure to the frame with the M4x14 Screws.
7. Re-attach the bottom frame panel to the BlueROV2 with the four M5x16 Screws.
8. Place the Gripper assembly into the Mount half with the holes for mounting onto the frame.
9. Slide the other Mount half onto the gripper assembly and insert the Thumbscrew into the mount hole.