Datasheet

TSYS01-FAMILY
Digital Temperature Sensor
SENSOR SOLUTIONS /// TSYS01-FAMILY
06/2018
Page 7
I
2
C
When the command is sent the TSYS01 stays busy until the conversion is done. All other commands
except the reset command will not be executed during this time. When the conversion is finished the data
can be accessed by sending a ADC read command, when an acknowledge appears from TSYS01.
READ ADC RESULT
After the conversion command the ADC result is read using ADC read command. Repeated ADC read
commands, or command executed without prior conversion will return all 0 as result.
SPI
I
2
C