Datasheet

TSYS01-FAMILY
Digital Temperature Sensor
SENSOR SOLUTIONS /// TSYS01-FAMILY
09/2017
Page 6
RESET SEQUENCE
The Reset sequence has to be sent once after power-on. It also can be used to reset the device ROM
from an unknown condition.
SPI
I
2
C
PROM READ SEQUENCE
The PROM Read command consists of two parts. First command sets up the system into PROM read
mode. The second part gets the data from the system.
Below examples are sequences to read address 3 (command 0xA6).
SPI
I
2
C