Data Sheet

2/7/2019 Ping Installation Guide for the BlueROV2 - Blue Robotics
https://www.bluerobotics.com/learn/ping-installation-guide-for-the-bluerov2/ 8/21
(/wp-content/uploads/2019/01/ping-grease-o-ring.png?x68454)
3. Install the O-ring onto the Ping cable penetrator.
4. Install the Ping cable penetrator on to the end cap in the hole you previously removed the blank penetrator from. Tighten to nger tight,
then use the provided wrench to tighten it an additional ~1/16 of a turn. If you can’t loosen it with your ngers, it is tight enough.
(/wp-content/uploads/2019/01/ping-end-cap.png?x68454)