Data Sheet

2/7/2019 Ping Installation Guide for the BlueROV2 - Blue Robotics
https://www.bluerobotics.com/learn/ping-installation-guide-for-the-bluerov2/ 2/21
You will also need:
1 x #1 Phillips head screwdriver ( BlueROV2 kit)
1 x Sharpie or other type of marking pen (not included)
1 x 5.50mm (or 7/32”) drill bit (not included)
1 x Battery Powered Hand Drill (not included)
1 x Bottle of Threadlocker (not included)
Removing a Blank Penetrator 
To remove a blank penetrator from your BlueROV2 , you will need the following tools:
1 x 2.5 mm hex driver
1 x #1 Phillips head screwdriver
1 x Penetrator wrench
1. To ensure your ROV is completely powered o, please remove the battery completely from the 3” enclosure and place to the side.
straight-6in-r1/)
Add to Cart (/learn/ping-
installation-guide-for-the-
bluerov2/?add-to-
cart=112513)
interface/bluart-r1-rp/)
Add to Cart (/learn/ping-
installation-guide-for-the-
bluerov2/?add-to-
cart=23073)
sonar-r2-rp/)
Add to Cart (/learn/ping-
installation-guide-for-the-
bluerov2/?add-to-
cart=13223)
Hex Key Set
$6.00
(https://www.bluerobotics.com/store/watertight-
enclosures/enclosure-tools-
supplies/tool-hex-set-r1/)
Add to Cart (/learn/ping-
installation-guide-for-the-
bluerov2/?add-to-
cart=1098)
Penetrator Wrench
$12.00
(https://www.bluerobotics.com/store/cables-
connectors/tools/tool-
penetrator-wrench-r1/)
Add to Cart (/learn/ping-
installation-guide-for-the-
bluerov2/?add-to-
cart=9971)