Data Sheet

2/7/2019 Ping Installation Guide for the BlueROV2 - Blue Robotics
https://www.bluerobotics.com/learn/ping-installation-guide-for-the-bluerov2/ 12/21
(/wp-content/uploads/2019/01/ping-tutorial-remove-frame-bottom.jpg?x68454)
3. Remove the 3″ battery enclosure by removing the M4x14 Screws from the bottom of the frame.
(/wp-content/uploads/2019/01/ping-remove-battery-enclosure.png?x68454)
4. Place the Ping mounting bracket on top of the bottom frame plate in a location so that it will not come in contact with the 3″ tube or any
other component of the ROV when installed. There is enough clearance so that it will not contact the underside of a thruster. Make sure
there is enough clearance so that the transducer head is unobstructed. The nal placement is up to the user, there is no template for where
the mounting plate *must* be installed.