Data Sheet
2/15/2018 Watertight Enclosure Documentation
http://docs.bluerobotics.com/watertight-enclosures/#assembly 6/14
SolidWorks Part (.sldprt)
IGES (.igs)
STEP (.step)
STL (.stl)
4” Series Enclosure
Assembly Model WTE4-ASM-R2.zip (http://www.bluerobotics.com/models/WTE4-ASM-R2.zip)
Acrylic Tube (Standard 11.75”, 298mm
length)
WTE4-P-TUBE-12-R1.zip (http://www.bluerobotics.com/models/WTE4-P-TUBE-12-R1.zip)
Aluminum Tube (Standard 11.75”, 298
mm length)
WTE4-M-TUBE-12-R1.zip (/wte/cad/WTE4-M-TUBE-12-R1.zip)
Aluminum O-ring Flange WTE4-M-FLANGE-SEAL-R2.zip (http://www.bluerobotics.com/models/WTE4-M-FLANGE-
SEAL-R2.zip)
Plain Solid End Cap WTE4-P-END-CAP-R1.zip (http://www.bluerobotics.com/models/WTE4-P-END-CAP-R1.zip)
Aluminum Solid End Cap WTE4-M-END-CAP-R1.zip (http://www.bluerobotics.com/models/WTE4-M-END-CAP-
R1.zip)
Aluminum End Cap with 10 x 10mm
Holes
WTE4-M-END-CAP-10X10MM-R1.zip (http://www.bluerobotics.com/models/WTE4-M-
END-CAP-10X10MM-R1.zip)
End Cap with 5 x 10mm Holes WTE4-P-END-CAP-5X10MM-R1.zip (http://www.bluerobotics.com/models/WTE4-P-END-
CAP-5X10MM-R1.zip)
End Cap with 10 x 10mm Holes WTE4-P-END-CAP-10X10MM-R1.zip (http://www.bluerobotics.com/models/WTE4-P-END-
CAP-10X10MM-R1.zip)
End Cap with 14 x 10mm Holes WTE4-M-END-CAP-14X10MM-R1.zip (/wte/cad/WTE4-M-END-CAP-14X10MM-R1.zip)
Dome End Cap WTE4-P-DOME-R1.zip (/wte/cad/WTE4-P-DOME-R2.zip)
Clamp WTE4-M-CLAMP-R1.zip (/wte/cad/WTE4-M-CLAMP-R1.zip)
Specications: 6” Series
Specication Table (6” Series)
6” Series Enclosure
Maximum Tested Depth (Saltwater) 210 ft 65 m
Maximum Pressure 91.1 psi 637.6 kPa
Tube Inner Diameter 6.0 in 152.4 mm
Tube Outer Diameter 6.5 in 165.1 mm
Tube Thickness 0.25 in 6.4 mm
Acrylic End Cap thickness 0.5 in 12.7 mm
Aluminum End Cap Thickness 0.24 in 6 mm
Aluminum Flange Inner Diameter 5.0 in 127 mm
Total Length 12.0 in 304.8 mm
Radial Seal O-ring (2 used) AS568-432, Buna-N
Face Seal O-ring (1 used) AS568-162, Buna-N
End Cap Screws (Acrylic Endcaps) M3x16 (Stainless Steel 316)